联系人:魏经理
电话:15165311861
手机:15165311861 15853170198
地址:济南市标山南路绿地东门
当前位置:首页-最新公告最新公告
光学玻璃镜片应该怎样正确的清洗?
作者:admin 来源:本站 发布时间:2018-09-03 16:14:43 浏览次数:102
光学玻璃清洗,光学透镜,棱镜清洗,相机镜片清洗等,都需要用到超声波清洗机设备。最近,有好几个客户反应说清洗不干净,找到问题原因,铭康实业清洗工程师过去查看,结果发现有些厂商对设备维护极少,造成水质有污染,有污染的水质与药水发生了化学反应,造成药水失效清洗不干。小编在这说一下光学玻璃镜片清洗的日常维护
Optical glass cleaning, optical lens, prism cleaning, camera lens cleaning, etc., all need to use ultrasonic cleaning machine equipment. Recently, several customers have responded that cleaning is not clean, to find the cause of the problem, Mingkang Industrial Cleaning Engineer in the past inspection, found that some manufacturers of equipment maintenance is very little, resulting in pollution of water quality, contaminated water quality and medicine occurred chemical reactions, resulting in the failure of cleaning medicine. Xiao Bian tells us about the routine maintenance of optical glass cleaning.
超声波清洗机的注意事项
Matters needing attention in ultrasonic cleaning machine
1、电源:所使用的电源配电功率一定要超过超声波机器额定的70%以上,因为只有配电功率足够的情况下超声波设备的发声振子,频率才不受到影响;电源电压不稳定是超声波受到影响的重要原因之一。
1. Power supply: The power supply used must be more than 70% of the rated power of the ultrasonic machine, because only when the distribution power is sufficient, the frequency of the ultrasonic equipment will not be affected; power supply voltage instability is one of the important reasons for the impact of ultrasonic.
2、洗净槽中无液或液位不足都会对设备造成不可逆转的破坏,使用时必需确保槽中注入足量的洗净液,否则相关的电热器、泵、超声波震子都可能损坏并可能引超火灾及人身伤害。
2. The equipment will be irreversibly damaged if there is no liquid in the cleaning tank or the liquid level is insufficient. When using, it is necessary to ensure that enough washing liquid is injected into the tank. Otherwise, the related electric heaters, pumps and ultrasonic vibrators may be damaged and may cause fire and personal injury.
3、电气控制箱及相关电气组件等注意不要溅入水,并远离水蒸汽、腐蚀性气体、粉尘等。
3. Electrical control box and related electrical components should not splash water, and away from steam, corrosive gases, dust and so on.

4、需要清洗的光学产品用有支脚的洗篮或挂具装挂好,置入槽中洗净,禁止将光学产品直接置入槽底进行洗净,否则可能引起光学产品或者缸底的损伤;正常作业是保证产品清洗OK的基本要求。

济南玻璃镜片

4. The optical products that need to be cleaned are installed and hung up with a foot-supported basket or hanging device, and are washed in a tank. It is forbidden to wash the optical products directly into the bottom of the tank, otherwise it may cause damage to the optical products or the bottom of the cylinder. Normal operation is the basic requirement to ensure that the products are cleaned OK.
5、超声波设备工作时,机体内可能存在高温、高压、电气组件端子表面带电、传动机构的运动、压力突动等可能的引起人身伤害的因素,在开机前需要检查完传动电机,运运机构,水循环系统是否正常,水压力等和项工作。
5. When the ultrasonic equipment is working, there may be high temperature, high pressure, electric component terminal surface charged, transmission mechanism movement, pressure sudden movement and other factors that may cause personal injury. Before starting, it is necessary to check the transmission motor, transport mechanism, water circulation system is normal, water pressure and other work.
6、在设备停用几天时建议把药水放掉,然后进行清洗药水槽,用薄膜保护好,防尖防腐蚀老化。
6. When the equipment is shut down for a few days, it is suggested that the liquid medicine should be discharged, and then the sink should be cleaned. The film should be used to protect the sink from corrosion and aging.
上文内容是由济南玻璃镜片厂家提供,想要了解更多的相关资讯,可以浏览我们的网站:http://www.dljianlei.com/,在网站中有更多专业知识的介绍,希望能为你提供帮助!
The above information is provided by Jinan Glass Lens Manufacturer. If you want to know more about it, you can visit our website: http://www.dljianlei.com/. There is more information about professional knowledge in the website. Hope to help you!