联系人:魏经理
电话:15165311861
手机:15165311861 15853170198
地址:济南市标山南路绿地东门
当前位置:首页-新闻中心新闻中心
干法磨边的玻璃隔断面板的生产工艺
作者:admin 来源:本站 发布时间:2018-07-12 14:01:41 浏览次数:324
我们传统的加工方式是将电工角磨机进行改造,对玻璃边部在切割后进行打磨处理,对少批量生产,此工艺要求简单,成本低。但长期以来由于玻璃的高硬度和脆性特征,在生产中存在以下几方面问题
The traditional processing method is to transform the electrician angle mill. The glass edge is cut after cutting. It is simple and low cost for less batch production. However, due to the high hardness and brittleness of glass, there are several problems in production.
干法磨边制造的玻璃隔断时存在粉尘污染较大,即便通过集尘装置进行回收,但还是不同程度地存在粉尘,同时对员工的身体造成一定的伤害。
There is a large amount of dust pollution in the glass partition made by dry grinding. Even through the collection of dust collection device, the dust is still existed in different degrees, and at the same time, it will cause some harm to the staff's body.
采用软硬适中的金刚打磨片,必须在高速旋转下进行作业,但同样避免不了造成很多缺陷,如玻璃隔断面板表面污染、密集小崩边、爆皮、端面凹凸等。

It is necessary to carry out the work under the high speed rotation with the soft and hard medium gold rigid grinding plate, but it can not cause many defects, such as the surface pollution of the glass partition panel, the dense small avalanche edge, the explosion skin, the end concave and convex, etc.

济南玻璃隔断

作业效率较低,电器设备除尘效果不明显,设备利用率低,且极易损坏。
The operation efficiency is low, the dust removal effect of electrical equipment is not obvious, the utilization rate of equipment is low, and it is easy to damage.
此类加工方式存在质量隐患,产品外观质量波动较大,
This kind of processing method has hidden danger in quality, and the appearance quality of products fluctuates greatly.
湿法磨边的玻璃隔断面板:
Glass partition panel with wet grinding edge:
手动工具改进,将以前的电动力工具改为气动力,大大降低噪音的同时,提高操作的安全性。
The manual tool is improved, and the former electric power tool is changed into pneumatic power, which greatly reduces noise while improving the safety of operation.
结合产品形状及玻璃坚硬且脆的特点,自行设计成型金刚轮。
Combined with product shape and hard and brittle glass, the diamond wheel is designed by itself.
湿法加水作业,从根本上解决了粉尘污染,明显改善作业环境。
The wet process has fundamentally solved the problem of dust pollution and improved the working environment.
加工范围从3-19 mm,同时可加工超大板面,每年节约成本约几万甚至是几十万元。
Processing range from 3-19 mm, at the same time processing large surface, annual cost savings of tens of thousands or even hundreds of thousands of yuan.
工艺改进后生产作业效率提升50%,产品质量明显得到改善,得到幕墙公司及业主的一致认可。
After the improvement, the production efficiency increased by 50%, and the quality of the products improved significantly.
目前国家大力提倡节能减排,玻璃隔断系统只有通过在生产实践中对工艺及设备的不断创新改革,我们才能够在竞争日益激烈中站稳脚跟。随着顾客的要求越来越高以及隔断产品种类的多样化,对原片质量管理工作更要不断提升和完善,仅停留在国标范围,将难以持续生存。
At present, the country vigorously advocates energy saving and emission reduction. Only through the continuous innovation and innovation of the technology and equipment in the production practice, we can stand a steady foothold in the increasingly fierce competition. With the increasing demand of customers and the diversification of the types of partition products, the quality management of the original film should be improved and perfected. It is difficult to stay on the national standard and will be difficult to survive.