联系人:魏经理
电话:15165311861
手机:15165311861 15853170198
地址:济南市标山南路绿地东门
当前位置:首页-新闻中心新闻中心
无框玻璃门怎么安装?
作者:admin 来源:本站 发布时间:2018-01-04 13:47:47 浏览次数:322
无框玻璃门
Frameless glass door
顾名思义就是玻璃周边没有固结的边框现代的家居装修或者办公装修,无框玻璃门使用越来越普遍。由于无框玻璃门采光性好、且装饰性也好,因此,越来越受到一些业主的青睐。下面小编谈谈无框玻璃门怎么安装及无框玻璃门的价格。
As the name implies, it is the modern home decoration or office decoration that is not consolidated around the glass, and the use of frameless glass doors is becoming more and more common. As the frameless glass door has good lighting and decoration, it is becoming more and more popular with some owners. The following is a little about how the frameless glass doors are installed and the price of the frameless glass doors.
其实对于无框玻璃门怎么安装,说容易也不容易,说难也不难。就看你怎么看待了。对专业人士来说,安装容易的很,那对于普通人来说,那也许有点难了。安装无框玻璃门首先我们要知道它的配套是是什么,因为无框玻璃门安装,配套很重要。

In fact, for how to install frameless glass doors, easy is not easy, that is also not difficult. Just see how you look at it. For professionals, it's easy to install, and that may be a bit hard for the ordinary people. First of all, we need to know what its matching is, because the installation of the frameless glass door is very important.

山东玻璃门

安装无框玻璃门
Frameless glass door
我们应该知道大体的安装步骤,然后根据步骤一步一步来。首先我们按照设计图确定定位线,来确定门框的位置,然后根据中心线引出两条边线,在进行门框顶部槽安装。
We should know the general installation steps and then step by step according to the steps. First, we determine the location line according to the design map, to determine the position of the door frame, and then draw two lines according to the center line, and install the top slot of the door frame.
在安装完顶部槽后到安装金属饰面的地托,接下来就是铝合金方管固定在预定的木砖上。固定好后,这时该到玻璃了,安装玻璃不是一个的人,要至少2个人才能安装好。这时把玻璃的下部放在底托的中心位置,然后再对接缝口进行整合。之后就是在相关的缝隙注入玻璃胶。安装完后就检查下,然后用抹布除去玻璃上得玻璃胶。
After installing the top slot to install metal veneer tray, the next step is Aluminum Alloy tube fixed on the predetermined block. When it's fixed, it's time to get to the glass. The glass is not a person, and at least 2 people will be able to install it. At this point, the lower part of the glass is placed at the center of the bottom, and then the joint is integrated. Then the glass glue is injected into the gap. After the installation is checked, then the glass is removed from the glass with a rag.