联系人:魏经理
电话:15165311861
手机:15165311861 15853170198
地址:济南市标山南路绿地东门
当前位置:首页-新闻中心新闻中心
山东豪华玻璃门的介绍及特点
作者:山东玻璃门 来源:http://www.dljianlei.com/ 发布时间:2017-07-24 11:50:15 浏览次数:537
自动门在我们的生活中是比较常见的,也是使用较多的,而在运行自动门的时候。我们要了解其故障,才能更好的让自动门得到使用。下面看看自动门常见的故障。
Automatic doors are more common in our lives and are used more often while running automatic doors. We need to understand the trouble to make it easier for automatic doors to be used. Here's a look at common faults in automatic doors.
山东豪华玻璃门在运行当中会出现伪故障,(伪故障:是指机组外部因素造成的故障现象,而不是门机设备本身的故障)。如果是伪故障,您自己就很容易进行修复;当然如果判断确实是主机内部的电子原配件或机械出现了问题,那我们还是建议您联系专业人士,由我们为您负责排除故障及更换配件。
When the automatic door is running, there will be a pseudo fault (false fault: the fault caused by the external factors of the unit, rather than the fault of the gate machine itself). Is your own fault if false, it was easy to repair; if the judgment is indeed the main internal electronic parts or mechanical problems, so we recommend that you contact us for you by the professionals, responsible for troubleshooting and replacement of parts.
玻璃门在写字楼以及超市使用的较多,玻璃门给人一种通透的感觉,让人们能够一眼就能看的见,而对于玻璃门的安装我们更应该注意其特点。而需要和定制玻璃门等咱们看看其特点。
Glass door in the office and supermarket use more, glass door gives a kind of penetrating feeling, let people can see at a glance, and for the installation of glass door, we should pay attention to its characteristics. And need and custom glass door, let's see its characteristics.
玻璃门拉手规格有很多种,如果与玻璃门拉手开孔距离不同,就无法进行安装,因此在购买拉手之前,一定要仔细的测量玻璃门拉手的开孔距离,以便确定玻璃门拉手规格。

Glass door handle there are many kinds of specifications, and if the glass door handle holes in different distance, can not be installed, so the purchase must handle before the opening distance measuring glass door handle carefully, in order to determine the specifications of glass door handle.

山东豪华玻璃门

目前市场上最常见的玻璃门拉手规格有:长度300毫米、直径25毫米、孔距200毫米,长度450毫米、直径32毫米、孔距300毫米,长度1200/1600/1800/2000毫米、直径38毫米、孔距900/1200/1400/1500毫米等。
The glass door handle on the market the most common specifications: length of 300 mm, 25 mm in diameter, hole spacing of 200 mm, length 450 mm, 32 mm in diameter, hole spacing of 300 mm, 1200/1600/1800/2000 mm in length and 38 mm in diameter, hole spacing 900/1200/1400/1500 mm.
自动门部件的介绍
Introduction to automatic door components
(1)主控制器:他是自动感应门的指挥中心,通过内部编有指令程序的大模块集成块,发出相应的指令,指挥马达或电锁类系统工作同时人们通过主控制器调节门扇开启速度、开启幅度等参数。
(1): he is the main controller of the automatic induction door command center, through internal compiled modules integrated block instruction program, sends out the corresponding instruction, the lock command motor or class system work at the same time people through the main controller to adjust the door open, open the speed range.
(2)感应探测器:负责采集外部信号,如同人们的眼睛,当有移动的物体进入他的工作范围时,他就会给主控器一个脉冲信号;
(2) inductive sensors: the acquisition of external signals, just like people's eyes, when a moving object enters its range of work, he gives a pulse signal to the master;
(3)山东玻璃门动力马达:提供开门与关门的主动力,控制自动感应门门扇加速与减速运行。
(3) power motor: to provide the initiative to open and close, control automatic induction door, door leaf acceleration and deceleration operation.
(4)自动门感应门扇进行轨道:就像火车的铁轨,约束门扇的吊具走轮系统,使其按特定方向进行。
(4) automatic door induction door leaf carries on track: just like the railroad track of the train, the sling that constrains the door leaf, take the wheel system, make it carry on in a certain direction.