联系人:魏经理
电话:15165311861
手机:15165311861 15853170198
地址:济南市标山南路绿地东门
当前位置:首页-新闻中心新闻中心
玻璃隔断墙如何施工安装呢?
作者:济南玻璃隔断 来源:济南玻璃镜片 发布时间:2017-07-19 10:57:10 浏览次数:436
隔断墙早已成为现代家居空间分隔装饰装修的一种常用方式,济南玻璃镜片其中备受当下年轻一族装修者们喜爱的要算玻璃隔断墙了,一是因为好看,二是因为不会阻碍视野,但是很多初次装修的业主对玻璃隔断墙并不是特别的了解,到底玻璃隔断墙怎么样呢?家居如果选择玻璃隔断墙进行安装的话,那么玻璃隔断墙如何施工安装呢?
The partition wall has become a common way of modern Home Furnishing space decoration, which is now young people's favorite is the decoration of glass partition wall, because two is good, because will not hinder the vision, but many first-time owners of the decoration on the glass partition wall is not particularly understand, in the end the glass partition how about the wall? Home, if you choose the glass partition wall for installation, then the glass partition wall how to build and install it?
玻璃隔断墙的优势特点:

Advantages and disadvantages of glass partition wall:

山东玻璃门

1、普通玻璃隔断:白玻璃充分体现了玻璃的通透特性,简洁明快。
1, ordinary glass partition: white glass fully reflects the permeability of glass, concise and lively.
2、彩艺玻璃隔断:彩艺玻璃,不但给人雅致高贵的质感,而且充分利用了玻璃的透光性,可以营造各种气氛。在简约素雅的空间中,彩艺玻璃更是表达精美细致的重要材料。
2, color art glass partition: Choi art glass, not only gives elegant and noble sense of texture, but also make full use of the transparency of the glass, you can create a variety of atmosphere. In the simple but elegant space, color art glass is more exquisite expression of important materials.
3、喷砂玻璃隔断:利用耐看的图纹图像展现模糊的美感,和其余透明的部分相对照,自由表现各种印象。
3, sandblasting glass partition: shows the fuzzy beauty use pattern image look, and the rest of the transparent part in the light of freedom of expression of various impression.
4、裂纹玻璃隔断:钢化玻璃被撞击后,整片玻璃呈自然龟裂,再在前后胶合清玻璃,形成裂纹,裂纹玻璃上每一片裂纹都不会一样,具有特殊的视觉印象。
4, crack: glass partition glass after being hit, the whole piece of glass is in a natural crack, then after gluing clear glass, the formation of cracks, crack the glass as each piece will not crack, with special visual impression.
玻璃隔断墙施工步骤与注意事项:
Construction steps and points for attention of glass partition wall:
1、玻璃砖应砌筑在配有两根f6~f8钢筋增强的基础上。基础高度不应大于150mm,宽度应大于玻璃砖厚度20mm以上。
1 glass bricks should be laid on the basis of two F6 to F8 reinforcing bars. The height of foundation shall not be greater than 150mm, and the width shall be more than 20mm of the thickness of the glass brick.
2、玻璃砖分隔墙顶部和两端应用金属型材,其糟口宽度应大于砖厚度10~18mm以上。
2, glass partition wall at the top and end of the use of metal profiles, and its mouth width should be greater than the brick thickness of 10 ~ 18mm above.
3、当隔断长度或高度大于1500mm时,在垂直方向每二层设置一根钢筋(当长度、高度均超过1500mm时,设置二根钢筋);在水平方向每隔三个垂直缝设置一根钢筋,钢筋伸入槽口不小于35mm,用钢筋增强的玻璃砖隔断高度不得超过4m。
3, when the partition length or height is more than 1500mm, in the vertical direction of each of the two layer is a steel (when the length and height of more than 1500mm, set two bar); in the horizontal direction every three vertical joints of a steel reinforcement, is not less than 35mm, glass reinforced brick partition the height shall not exceed 4m.
4、玻璃分隔墙两端与金属型材两翼应留有宽度不小于4mm的滑缝,缝内用油毡填充;山东玻璃门分隔板与型材腹面应留有宽度不小于10mm的胀缝,以免玻璃砖分隔墙损坏。
4, glass partition ends and the metal section wings should have a width of not less than 4mm of the sliding joints, joints with glass felt filling; the partition plate and the ventral profile should have a width of not less than 10mm of the expansion joint, so as not to damage the walls of glass brick.
5、玻璃砖最上面一层砖应伸入顶部金属型材槽口10~25mm,以免玻璃砖因受刚性挤压而破碎。
5, the top layer of glass brick should be extended to the top of the metal profile notch 10 to 25mm, so as to avoid the glass brick due to rigid extrusion and broken.
6、玻璃砖之间的接缝不得小于10mm,且不大于30mm。
6. The joint between the glass bricks shall not be less than 10mm and not greater than 30mm.
7、玻璃砖与型材、型材与建筑物的结合部,应用弹性密封胶密封。
7, glass brick and profiles, profiles and building joints, the use of elastic sealant seal.